Brake fluid health
Check fluid health rather than replacing solely by elapsed time; heavy brake use can shorten the interval.
Verified2020 Tesla Model Y / Performance AWD · Automatic (A1) · Electric · 147 and 211 kW AC 3-Phase
Factory intervals, fitment limits, tools, fluids, torque information, and common home-service searches.
← Back to specificationsThese sourced values are shared by the specification sheet and the maintenance guides for this exact configuration.
Check fluid health rather than replacing solely by elapsed time; heavy brake use can shorten the interval.
VerifiedInspect for wear, rust, and free movement; regenerative braking can reduce use of the friction brakes.
VerifiedMatch the installed bulb or fuse rating exactly and diagnose repeat failures before replacing again.
VerifiedSwitch off climate control before accessing the right front footwell. Disconnect the cover connectors by their housings, never the wires. Replace both filters, lower first, with arrows pointing rearward. Refit the cover; the screw-equipped version uses 1.2 Nm. Tab-equipped covers do not use that screw torque.
VerifiedReplace the HEPA and carbon filter set only when the vehicle is equipped with that system.
VerifiedInspect the case, terminals, hold-down, and starting behavior before choosing the exact replacement type.
VerifiedPark, switch off the wipers and enable Wiper Service Mode. Lift each arm only enough to release its blade, with a towel protecting the glass. Fit the matching connector, then confirm the new blade locks with a push-pull check before leaving service mode. Arms do not lock upright.
Verified