Maintenance / 2008 AP2 CR
Use the stated oil grade and API certification. Replace the drain washer and filter, torque the drain bolt to 39 Nm, and confirm the final dipstick level and absence of leaks. A low oil-pressure warning that remains on after starting requires immediate engine shutdown.
01 / Requirements
These sourced values are shared by the specification sheet and the maintenance guides for this exact configuration.
Match the recorded grade, required oil specification and refill quantity before ordering. Follow the vehicle's maintenance schedule, not an oil brand's advertised maximum interval.
Urobolus may earn a commission from purchases made through these links. Affiliate disclosure
Five-quart engine oil jug · Use this 5-US-qt jug with the matching Valvoline Advanced Full Synthetic 10W-30 one-quart bottle below: 6 US qt purchased for the 5.1-US-qt (4.8-L) oil-and-filter refill. Fill only to the correct dipstick level; keep the remainder.
Manufacturer details ↗Extra one-quart oil bottle · If choosing Valvoline Advanced Full Synthetic 10W-30, one 5-US-qt jug plus this 1-US-qt bottle provides 6 US qt for the 5.1-US-qt (4.8-L) filter-change refill. Add only the amount needed to reach Honda’s correct dipstick level and retain the remainder. This bottle is the same oil family and grade as the five-quart option.
Manufacturer details ↗Urobolus may earn a commission from purchases made through these links. Affiliate disclosure
Replacement oil filter · One filter per oil-and-filter service. Retain Honda’s Maintenance Minder interval; follow K&N’s filter installation instructions.
Manufacturer details ↗Urobolus may earn a commission from purchases made through these links. Affiliate disclosure
New oil drain washer · Use one new washer per oil change. This pack contains ten; retain the remaining nine for later services.
Manufacturer details ↗