2021 Honda Civic / 5Dr · Manual 6-speed · 4 cyl · 2.0 L · Turbo

Owner maintenance and common replacements

Factory intervals, fitment limits, tools, fluids, torque information, and common home-service searches.

← Back to specifications

Configuration-specific service and fitment facts

These sourced values are shared by the specification sheet and the maintenance guides for this exact configuration.

Engine oil viscosity
SAE 0W-20 Verified
Engine oil specification
Premium-grade detergent engine oil bearing the API Certification Seal Verified
Engine oil refill with filter
5.7 US qt VerifiedPublished as 5.7 US qt (5.4 L); verify final level with the dipstick after service.
Engine oil refill without filter
5.3 US qt Verified
Oil drain plug torque
30 lb-ft Verified
Coolant specification
Honda Long Life Antifreeze/Coolant Type 2, premixed 50/50 Verified
Brake fluid
Honda Heavy Duty Brake Fluid DOT3 Verified
Spark plug specification
NGK ILZKAR8H8S Verified
Manual transmission fluid
Honda MTF Verified
Manual transmission refill
2.3 US qt Verified
Original tire pressure, front
35 psi VerifiedThe manual gives 35 psi (240 kPa) front and 33 psi (230 kPa) rear for both listed original 2.0 L wheel options,18-inch and 20-inch. Confirm actual fitment and door label; modified tires/wheels require separate review.
Original tire pressure, rear
33 psi VerifiedThe manual gives 35 psi (240 kPa) front and 33 psi (230 kPa) rear for both listed original 2.0 L wheel options,18-inch and 20-inch. Confirm actual fitment and door label; modified tires/wheels require separate review.
Original tire load and speed specification
Conditional original equipment:235/40 R 18 95 Y with 2.0 L 18-inch wheels;245/30 ZR 20 90 Y with 20-inch wheels. Exact installed option must be confirmed. Verified
Oil filter applications
WIX 57356 VerifiedReviewed only for the eight explicitly assigned 2021 Civic sedan, hatchback and Type R configurations with their recorded engines and transmissions. The Type R match comes from its separate K20C1 row. WIX displacement labels are retained as printed and do not change Honda displacement. Use one standard 57356 filter and follow Honda service intervals.
01

Engine oil and filter

Match both the oil grade and specification to this engine. Check the refill conditions before buying oil, then use the dipstick to confirm the final level.

VerifiedProduct compatibility review in progress
02

Brake fluid and inspection

Check the reservoir and inspect any low level, warning light or changed pedal feel before driving. Repeated topping-up is not a repair.

Verified
03

Cabin air filter

Check reduced ventilation airflow and inspect the cabin filter where fitted. Follow the year-specific instructions for access and installation direction.

Verified
04

Engine air filter

Inspect the filter housing and replace the element on the applicable schedule, sooner in dusty use when the manual requires it.

Verified
05

Engine coolant

Check the reservoir level with the engine cold and investigate repeated coolant loss. Coolant type and replacement procedure matter as much as capacity.

Verified
06

Manual transmission fluid

Match the fluid to the exact transmission, not just the vehicle model. A drain-and-refill amount differs from the total dry capacity.

Verified
07

Scheduled chassis and owner inspections

Follow the exact model-year schedule and its special-use conditions. Inspect worn or damaged components and use the applicable service procedure for repairs.

Verified
08

Spark plugs

Use the engine-specific plug type. Check the service schedule and inspect ignition faults before replacing parts.

Verified
09

Tires and rotation

Check cold pressures, tread wear and damage. Use the vehicle placard for the fitted tire size and load rather than the tire sidewall maximum.

Verified