2001 Honda Civic / HX · Automatic (variable gear ratios) · 4 cyl · 1.7 L

Owner maintenance and common replacements

Factory intervals, fitment limits, tools, fluids, torque information, and common home-service searches.

← Back to specifications

Configuration-specific service and fitment facts

These sourced values are shared by the specification sheet and the maintenance guides for this exact configuration.

Engine oil viscosity
SAE 5W-20 Verified
Engine oil specification
Premium-grade detergent oil with the API Certification Seal for gasoline engines Verified
Conditional engine oil refill
Oil change including filter: U.S. DX/LX 3.2 L; EX and coupe HX 3.5 L. Retail trim is unresolved for generic EPA records. Excludes oil remaining in the engine; check the dipstick after running, checking for leaks and waiting several minutes. Verified
Coolant specification
Honda All Season Antifreeze/Coolant Type 2, premixed 50/50; no additional mixing Verified
Brake fluid
Honda DOT 3 brake fluid Verified
Spark plug specification
NGK PZFR6F-11 or DENSO PKJ20CR-M11 Verified
Spark plug gap
0.043 in VerifiedNominal 1.1 mm, tolerance +0/-0.1 mm.
Engine oil refill with filter
3.7 US qt Verified
Engine oil refill without filter
3.5 US qt Verified
CVT fluid specification
Honda Genuine CVT Fluid (08200-9006) Verified
Engine oil drain washer
Install a new drain-bolt washer Verified
01

Engine oil and filter

Match both the oil grade and specification to this engine. Check the refill conditions before buying oil, then use the dipstick to confirm the final level.

VerifiedProduct compatibility review in progress
02

Brake fluid and inspection

Check the reservoir and inspect any low level, warning light or changed pedal feel before driving. Repeated topping-up is not a repair.

Verified
03

CVT fluid

Match the fluid to the exact transmission, not just the vehicle model. A drain-and-refill amount differs from the total dry capacity.

Verified
04

Engine air filter

Inspect the filter housing and replace the element on the applicable schedule, sooner in dusty use when the manual requires it.

Verified
05

Engine coolant

Check the reservoir level with the engine cold and investigate repeated coolant loss. Coolant type and replacement procedure matter as much as capacity.

Verified
06

Spark plugs

Use the engine-specific plug type. Check the service schedule and inspect ignition faults before replacing parts.

Verified
07

Timing belt and water-pump inspection

Track belt replacement by both age and mileage. This is an engine-specific workshop job, not a generic belt replacement procedure.

Verified
08

Tires and rotation

Check cold pressures, tread wear and damage. Use the vehicle placard for the fitted tire size and load rather than the tire sidewall maximum.

Verified