Engine oil and filter
Match both the oil grade and specification to this engine. Check the refill conditions before buying oil, then use the dipstick to confirm the final level.
Verified3 compatible products2007 Honda Accord / Automatic 5-speed · 6 cyl · 3.0 L
Owner maintenance and common replacements
Factory intervals, fitment limits, tools, fluids, torque information, and common home-service searches.
← Back to specificationsConfiguration-specific service and fitment facts
These sourced values are shared by the specification sheet and the maintenance guides for this exact configuration.
- Engine oil viscosity
- 5W-20 Verified
- Engine oil specification
- API-certified oil for gasoline engines Verified
- Engine oil refill with filter
- 4.5 US qt VerifiedRefill with a new filter; confirm the final dipstick level.
- Brake fluid
- Honda Heavy Duty Brake Fluid DOT 3 Verified
- Coolant specification
- Honda Type 2 coolant; premixed 50% antifreeze / 50% water Verified
- Automatic transmission fluid
- Honda Genuine ATF DW-1 (replaces ATF-Z1) VerifiedUse the vehicle's normal/severe service schedule and level-check procedure. This bulletin establishes the fluid, not a routine refill quantity or a new service interval.
- Oil filter applications
- WIX 57356 / 57356XP Verified
12-volt battery
Inspect the case, hold-down and terminals. Confirm dimensions, polarity and venting before selecting a replacement battery.
VerifiedAutomatic transmission fluid
Match the fluid to the exact transmission, not just the vehicle model. A drain-and-refill amount differs from the total dry capacity.
VerifiedBrake fluid and inspection
Check the reservoir and inspect any low level, warning light or changed pedal feel before driving. Repeated topping-up is not a repair.
VerifiedCabin air filter
Check reduced ventilation airflow and inspect the cabin filter where fitted. Follow the year-specific instructions for access and installation direction.
VerifiedEngine air filter
Inspect the filter housing and replace the element on the applicable schedule, sooner in dusty use when the manual requires it.
VerifiedEngine coolant
Check the reservoir level with the engine cold and investigate repeated coolant loss. Coolant type and replacement procedure matter as much as capacity.
VerifiedLights and fuses
Check exterior lights and use the manual's lamp and fuse diagrams to identify the failed circuit. A repeatedly blown fuse needs diagnosis.
VerifiedTiming belt and water-pump inspection
Track belt replacement by both age and mileage. This is an engine-specific workshop job, not a generic belt replacement procedure.
VerifiedTires and rotation
Check cold pressures, tread wear and damage. Use the vehicle placard for the fitted tire size and load rather than the tire sidewall maximum.
VerifiedWiper blades and washer fluid
Replace damaged or streaking blades after checking that the glass and rubber are clean. Confirm the driver/passenger lengths and connector before ordering.
Verified